American Power Conversion 200/208 V User Manual
Page 37
Advertising
Operation – Battery Replacement
990-2359A
Smart-UPS® VT 10-30kVA, 200/208V and XR Battery Enclosure Operation Guide
29
Removal and installation of Battery Lock (if applicable)
If your system is equipped with Battery Lock, follow the below procedure to remove the Battery
Lock.
Remove the M3 screw attaching the Battery Lock to the shelf.
Push the Battery Lock to the left, push it upwards and remove.
Use reversed procedures for installation of Battery Lock
SEE!
“Front Panel removal” on page 18 and “Remove Battery Compartment Cover” on
page 19.
NOTE!
For safety reasons APC recommends to attach battery locks.
Advertising