Innotech Chronicle - Manual (Page 10)

Chronicle Installation Instructions
Page 10 © Mass Electronics Pty Ltd 2012 Edition 3.1 dated 31/03/2014
Setup Process
To ensure that Chronicle Trending Setup is completed correctly, follow the procedures in this
document.
1. Setup the Networks. Use the network design document so you know all I/O Server
connections, Devices and Addresses. (Ensure all hardware is powered and communicating
with iComm prior to proceeding)
2. Install the software:
a. Chronicle Server (This installer will install iSEA and SQL Server if required)
b. Chronicle Manager
c. Magellan Builder/Bundle (Only Required for initial Setup, then remove the dongle)
d. Magellan Explorer or eServer (using the customer supplied dongle)
After Chronicle Server has been installed, you can check the Windows Services to see if the Chronicle
Server and SQL Server (SQLExpress) services are running. See Table 2 below for instructions on
viewing the services. You can also view if the services are running in iSEA's status window. Refer to
the iSEA Installation Instructions.
Figure 5: Chronicle Server Service - Windows 7
Table 2: Windows Services
Operating System Procedure
Windows XP
1. Right click "My Computer" in the start menu or the icon on the desktop.
2. Select Manage from the Context Menu.
3. Click the plus (+) to the left of Services and Applications in the left pane.
4. Click Services. The running services will appear in the right pane.
Windows 7
1. Right click "Computer" in the start menu or the icon on the desktop.
2. Select Manage from the Context Menu.
3. Click the arrow to the left of Services and Applications in the left pane.
4. Click Services. The running services will appear in the middle pane.
The Chronicle Server installation file contains all the software for the installation of Chronicle Server and its
pre-requisites. The user must have Administrator rights to install the software.