Innotech Chronicle - Manual (Page 17)

Chronicle Installation Instructions
Page 17 © Mass Electronics Pty Ltd 2012 Edition 3.1 dated 31/03/2014
Creating the project
With the above steps completed, we can now begin to build the project.
1. Right click in the blank portion of the Server & Device window and select Create iComm
server. You can also select Create an iComm Server, from the Project menu item in Manager.
The Server Address will be
the DNS name, or the Static IP
of the computer that iComm
is running on.
Make the Server Name
meaningful. This name
is used for reference and
cannot be blank. It is
recommended that the
default name 'Local Host' is
NOT used.
Figure 18: Click "Create iComm Server" in the context menu
Figure 19: iComm Server Window
Right Click a
blank area.
Left click
Create iComm
Server.
NOTE
Refer to the Chronicle Manager section to identify the individual Chronicle Manager windows .
The Server Address must also be used in the ATOM or Magellan trending project. For example, if the DNS Name
ATOM is used, then this must also be used in the database settings in the Magellan / ATOM project.
IMPORTANT