Innotech Chronicle - Manual (Page 16)

Chronicle Installation Instructions
Page 16 © Mass Electronics Pty Ltd 2012 Edition 3.1 dated 31/03/2014
Testing the connection
Click on the Test Connection Button in the Server Settings window. If the settings are correct you
should see the success popup as shown in Figure 15.
If the settings are not correct, the error popup appears as shown in Figure 16. Check all parameters in
the settings screens and retest the connection. If the database connection still fails, contact Innotech
for assistance (See the last page of this document for contact details).
Figure 15: Database Connection Success Window
Figure 16: Database Connection Failure Window
If you have selected SQL Express 10GB as the Database Server Type and have NOT plugged the USB
dongle into the PC you will see the following error message after testing the connection as shown
below.
Figure 17: Chronicle Dongle Missing Window