Atmel AVR2070 - Manual (Page 10)

10
AVR2070
8240B-AVR-06/09
3.3 Build Sizes
This section shows various build sizes using different compile flags described from
Table 3-1.
Table 3-2 Various Build Sizes for AVR and ARM
Coordinator Router End Node
Raven USB Coordinator
IPv6 off
DEBUG on
Sensor App
SLEEP on 25332 bytes FLASH
4811 bytes SRAM
Raven - all features
IPv6 on
DEBUG off
Sensor App
SLEEP on (Cannot build IPv6
coordinator on AVR
target) 21138 bytes FLASH
1901 bytes SRAM 19280 bytes FLASH
1356 bytes SRAM
Raven without Ipv6
IPv6 off
DEBUG off
Sensor App
SLEEP on 13354 bytes FLASH
2377 bytes SRAM 15218 bytes Flash
1093 bytes SRAM 13208 bytes FLASH
548 bytes SRAM
Raven Minimal Size
All options off
RUM network only 8864 bytes FLASH
1875 bytes SRAM 7984 bytes FLASH
568 bytes SRAM 5716 bytes FLASH
412 bytes SRAM
SAM7X Coordinator
IPv6 on
DEBUG on
Sensor App
SLEEP on 102K bytes FLASH
17K bytes SRAM
3.4 Fuse settings
The fuses for the AVR platforms vary on the target microcontroller. These fuse
settings have been listed below for the appropriate platforms. These fuse settings can
be entered into the target of choice using AVR Studio or AVR Dude for command line
operation.
Raven (1284p): 0xFE; 0x91; 0xE2
Raven LCD (3290p): 0xFE; 0x91; 0xE2
Raven USB: 0xFB; 0x99; 0xDE
ZigBit/ZigBit900: 0xFE; 0x91; 0xE2