Atmel AVR2070 - Manual (Page 68)

68
AVR2070
8240B-AVR-06/09
folder structuring has been properly followed; the Rowley project file should build as
expected.
Figure D-2-2 Rowley IDE
The Rowley Crossworks interface looks like the image shown in figure D-2-2.
The Rowley compile option flags can be set via the IDE. Click on Project ->
Properties to locate the Preprocessor Options. Figure D-2-3 shows what the
configuration screen looks like.
Complete descriptions of compile time options are found in section 3.2.1:
• APP=0,1
• CHINA=0,1
• DEBUG=0,1
• DEMO=0,1
• IPV6LOWPAN=0,1
• PAN_CHANNEL=0 or integer 0 – 26
• PAN_ID=0 or 2 byte user defined
• PLATFORM=0
Note: Not needed for SAM7X
• BAND=BAND2400,
BAND900
• CHINA_MODE=0,
1
• RUMSLEEP=0,1
• SENSOR_TYPE=0