JJC TM Series Multi-Function Timer Remote control - Manual (Page 2)

For Your Safety
Do not disassemble or modify
Keep Dry
Keep out of reach of children
Do not use in the presence of flammable gas
Do not expose to high temperatures
Replacing Batteries:
Connecting the TM controller:
1. Turn the camera and TM controller OFF
2. Remove the remote socket cover from the camera
3. Connect the plug to the remote socket
4. Turn the camera and TM controller ON
5. Now you can start program the function and enjoy the timer trigger.
Disconnecting the TM controller:
1. Turn the camera and TM controller OFF
2. Disconnect the plug from the camera body
3. Replace the remote socket cover
1. Turn OFF the TM controller
2. Turn OFF the Camera and Disconnect the TM controller
3. Remove the batteries (AAA 1.5V or LR03 Alkaline
batteries)
4. Insert two fresh batteries