Milestone XProtect Smart Client 2013 - Manual (Page 50)

Milestone XProtect ® Smart Client
2014
User's Manual
www.milestonesys.com 50 Defining your views
3. Select a layout for your new view. You can select layouts for displaying up to 100 (10×10)
cameras in a single view. Available layouts are grouped according to their aspect ratio
(height/width relationship: 4:3 or 16:9), and according to whether they are optimized for regular
content or content in portrait mode (where the height is greater than the width).
4. Enter a name for the view by overwriting the default New View name.
Copy, rename, or delete a view or group
Important: Views can only be copied within the same session; you cannot copy views from one
XProtect Smart Client to another.
If you have a view and you want to reuse it, you can copy it. You can also copy a group of views or a
private view to a shared view.
1. In setup mode, in the navigation pane, select the view.
2. Click Copy:
Or press CTRL+C.
3. Browse to where you want to copy the view, select Paste:
Or press CTRL+V.
Tip: Alternatively, you can select and drag the view to another folder.
4. The copied view is by default named the same as the original followed by (2). To rename it,
click Rename:
Or right-click and select Rename.

To delete a view, select the relevant view, and either click Delete:
Or right-click and select Delete.