Milestone Mobile 2013 (Client) - Manual (Page 16)

Milestone Mobile 2014 (Client)
www.milestonesys.com 16 Video Push
Video Push
About Video Push
Video Push is a feature that allows you to use your mobile device's camera to send a video stream
from your mobile device to your system in order to, for example, collect evidence when you investigate
an alarm. In the Mobile server settings, you can set the users who should be able to use the Video
Push feature on the system.
You set up Video Push settings on the Mobile server. For information about how to set up Video Push
in your system, see the Milestone Mobile Administrator's Manual, which you can download from the
Mobile Help website (http://www.milestonesys.com/mobilehelp).
Use Video Push
1. On the bottom navigation bar (iOS), tap the Video Push control. From the top drop-down
menu (Android), select Video Push. Slide to the Video Push page (Windows ® Phone).
2. As the device's camera turns on, tap the Record button (Android) / Push button (iOS) / Start
Video Push button (Windows ® Phone) to begin recording. If your Windows ® Phone device has a
front-facing camera, you will see an additional button on the Video Push page the caption of
which indicates the camera currently in use. To switch to the other camera, tap this button.
3. When finished, tap the Stop Recording button (Android) / Stop button (iOS, Windows ® Phone).
Watch recorded video from your Video Push camera in Milestone Mobile client
1. Go to any view where you have added the Video Push camera.
2. Tap the camera to go to full screen live view.
3. Tap on Playback.
4.
5. From here, view all recent recordings done from your Video Push camera by navigating via the
play forward/backward buttons or by going to recent history. The most recent recordings are
shown at the top of recent history.
Camera settings (Video Push)
When you set up Video Push in Milestone Mobile client, specify the following settings: