NORD Drivesystems B1091 - Manual (Page 3)

www.nord.com B1091-GB-4613 -3-
1. Information
1. General information
These Operating Instructions must be read before you transport, assemble, commission,
maintain or repair NORD motors. All persons who are involved with such tasks must observe
these Operating Instructions. All safety instructions provided in these Operating Instructions
must be strictly observed for reasons of personal protection and protection of property.
Information and instructions provided in the manual supplied, safety and commissioning
information and all other manuals must be observed.
This is absolutely essential in order to avoid hazards and damage!
Any applicable national, local and system-specific regulations and requirements must also be
observed!
Special designs and design variants may differ with regard to technical details. If any
points are not clear, it is urgently recommended that you consult the manufacturer
stating the type designation and motor number or have the maintenance work
performed by NORD.
Qualified staff are persons who, owing to their training, experience, instruction received, and
their knowledge of relevant standards, accident prevention regulations and the appropriate
operating conditions, are entitled to perform the activities necessary in order to put the motor
into operation.
This also includes knowledge of first aid measures and the local emergency services.
It is assumed that the work for transport, assembly, installation, commissioning, maintenance
and repair will be performed by qualified staff.
In particular, the following points must be observed:
 Specifications and information about permissible use, assembly, connection, ambient
and operating conditions, which are included in the catalogue, the order
documentation and any other product documentation
 The local, system-specific regulations and requirements
 Proper use of tools, hoisting equipment and transport equipment
 Use of personal safety equipment
For reasons of clarity the Operating Instructions cannot contain all detailed information about
possible design variants so that they cannot take into consideration every conceivable case of
installation, operation or maintenance.
For this reason these Operating Instructions essentially only contain such instructions as are
required for normal use by qualified staff.
To prevent malfunctions it is necessary that the specified maintenance and inspection work is
performed by appropriately trained staff.
 The planning guide B1091-1 must be included with the operating instructions when
operated with the inverter.
 The additional operating instructions must be taken into account if an external fan is
present.
 The brake operating instructions must also be taken into account with braking motors.
If, for any reason, the operating instructions or the planning guide are lost, new documentation
must be obtained from Getriebebau NORD.