NORD Drivesystems BU0540 User Manual
Sk 500e, Gb bu 0540
Advertising
Table of contents
Document Outline
- Safety and operating instructions for drive power converters
- Intended use of the frequency inverter
- Documentation
- Version list
- Validity
- Publisher
- Table of Contents
- 1. Overview
- 2. Assembly and installation
- 2.1 SK 5xxE, standard version
- 2.2 Electrical connections
- 2.2.1 Wiring guidelines
- 2.2.2 Adaptation to IT networks
- 2.2.3 Electrical connections, power unit
- 2.2.4 Electrical connections, control unit
- Terminal block X3, (above size 8: X3.1 and X3.2) - Relay
- Terminal block X4 – Analog I/O
- Configuration of analog signals
- Terminal block X5 – Digital In
- Terminal block X6 – Encoder
- Terminal block X7 – Digital I/O
- Control block X9 and X10 – CAN / CANopen
- Plug connector block X11 – RS485 / RS232
- Terminal block X12 – 24 VDC input (only size 5 … 7)
- Terminal block X13 – motor PTC (only size 5 … 7)
- Terminal block X15 – motor PTC and 24V input (above size 8)
- 2.3 Colour and contact assignments for encoders
- 3. Displays and control
- 4. Commissioning
- 5. Parameters
- 6. Operating status messages
- 7. Technical data
- 8. Maintenance and servicing information
- Key word index