NORD Drivesystems BU0500 User Manual
Sk 500e, Gb bu 0500
Advertising
Table of contents
Document Outline
- Safety and operating instructions for drive power converters
- Intended use of the frequency inverter
- Documentation
- Version list
- Publisher
- Table of Contents
- List of illustrations
- List of tables
- 1. General
- 2. Assembly and installation
- 2.1 SK 5xxE, standard version
- 2.2 SK 5xxE…-CP in ColdPlate version
- 2.3 External heat sink kit
- 2.4 Snap-on mounting rail kit SK DRK1…
- 2.5 EMC Kit
- 2.6 Brake resistor (BR)
- 2.7 Mains choke SK CI1
- 2.8 Output choke SK CO1
- 2.9 Line filter
- 2.10 Electrical connections
- 2.10.1 Wiring guidelines
- 2.10.2 Adaptation to IT networks
- 2.10.3 DC-coupling
- 2.10.4 Electrical connections, power unit
- 2.10.5 Electrical connections, control unit
- Terminal block X3, (above size 8: X3.1 and X3.2) - Relay
- Terminal block X4 – Analog I/O
- Terminal block X5 – Digital In
- Terminal block X6 – Encoder
- Terminal block X7 – Digital I/O
- Terminal block X8 – Safe pulse lock (not with 115V devices)
- Control block X9 and X10 – CAN / CANopen
- Plug connector block X11 – RS485 / RS232
- Terminal block X12 – 24 VDC input (only size 5 … 7)
- Terminal block X13 – motor PTC (only size 5 … 7)
- Terminal block X15 – motor PTC and 24V input (above size 8)
- 2.11 Colour and contact assignments for encoders
- 2.12 RJ45 WAGO- Connection module
- 2.13 Setpoint card ± 10V
- 3. Displays and control
- 4. Commissioning
- 5. Parameters
- Availability of parameters
- Array parameter display
- Operating displays
- Basic parameters
- Motor data / Characteristic curve parameters
- Control parameters
- Control terminals
- List of possible analog functions of the analog inputs
- List of possible functions of the analog inputs
- List of possible analog functions of the analog outputs
- List of possible digital functions of the analog outputs
- List of the possible functions of digital inputs
- Pulse input functions: 2...22kHz (only DIN2/3)
- HTL encoder function (only DIN2/4 )
- List of possible functions of the relays and digital outputs
- Additional parameters
- Positioning
- Information
- 6. Operating status messages
- 7. Technical data
- 8. Additional information
- 8.1 Setpoint processing
- 8.2 Process controller
- 8.3 Electromagnetic Compatibility (abbreviation: EMC)
- 8.4 EMC limit value classes
- 8.5 Reduced output power
- 8.6 Operation with FI circuit breakers
- 8.7 Energy Efficiency
- 8.8 Standardisation of setpoint / target values
- 8.9 Definition of setpoint and actual value processing (frequencies)
- 9. Maintenance and servicing information
- Key word index