NORD Drivesystems BU0500 - Manual (Page 145)

6 Operating status messages
BU 0500 GB-1013 145
E014 --- Reserved Error message for POSICON à see supplementary
instructions
Pos : 413 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E015 [ SK 180E ... SK 5xxE] @ 2\ mod_1347454278051_388.doc x @ 46801 @ @ 1
E015 --- Reserved
Pos : 414 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E016 [ SK 135E ... SK 5xxE] @ 2\ mod_1347454280625_388.doc x @ 46826 @ @ 1
E016 16.0 Motor phase error A motor phase is not connected.
• Check P539
• Check motor connection
16.1 Magnetisation current
monitoring
"Magnetisation current
monitoring"
Required exciting current not achieved at moment of switch-
on.
• Check P539
• Check motor connection
Pos : 415 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E018 "res er viert" [ SK 2xxE/F ehler E018 "reser vi ert" [ SK 2xxE/SK 5xxE] @ 2\ mod_1347454282777_388.doc x @ 46851 @ @ 1
E018 18.0 Reserved Error message for "Safe Pulse Block" à see supplementary
instructions
Pos : 416 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E019 [ SK 180E/ SK 2xxE/Fehler E019 [SK 180E/SK 2xxE/ SK 5xxE] @ 2\ mod_1347454285788_388. doc x @ 46876 @ @ 1
E019 19.0 Parameter identification
"Parameter identification"
Automatic identification of the connected motor was
unsuccessful
• Check motor connection
• Check pre-set motor data (P201 ... P209)
19.1 Star / Delta circuit incorrect
"Star / delta motor circuit
incorrect
Pos : 417 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E020 /F ehl er E020 / E021 [ SK 135E .. . SK 5xxE] @ 2\ mod_1347454288768_388. doc x @ 46901 @ @ 1
E020
E021
20.0 Reserved
System error in program execution, triggered by EMC
interference.
• Observe wiring guidelines
• Use additional external mains filter.
• Earth the FI very well.
20.1 Watchdog
20.2 Stack Overflow
20.3 Stack underflow
20.4 Undefined Opcode
20.5 Protected Instruct.
„Protected Instruction“
20.6 Illegal Word Access
20.7 Illegal Inst. Access
“Illegal Instruction Access”
20.8 Program Memory Error
"Program memory error"
(EEPROM error)
20.9 Memory Protection Error
21.0 NMI Error
(not used by hardware)
21.1 PLL Error
21.2 ADU Error "Overrun"
21.3 PMI Error "Access Error"
21.4 Userstack Overflow
Pos : 418 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E022 "res er viert" [ SK 5xxE] @ 2\ mod_1361527702934_388. doc x @ 59091 @ @ 1
E022 --- Reserved Error message for PLC à see supplementary instructions
Pos : 419 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ St örmel dungen/F ehl er E023 "res er viert" [ SK 5xxE] @ 2\ mod_1361527808170_388. doc x @ 59116 @ @ 1
E023 --- Reserved Error message for PLC à see supplementary instructions
Pos : 421 /Anleit ungen/6. / 7. Mel dungen z um Betriebsz ust and [BU 0500 / BU 0200]/ 6./ 7. 2 - Warnmeldungen (Tabellenüberschrif t) @ 3\ mod_1361803463080_388. doc x @ 59898 @ 5 @ 1