NORD Drivesystems TI 275271019 - Manual

Technical Information / Datasheet
EtherNet/IP Bus module SK CU4-EIP
1.1 LED - Anzeigen / LED displays, Derating 4913 Rck TI 275900150 GB
version reason for change(s) issue name document speech
Pos : 4 /T ec hnis che Inf or mationen/ SK xU x - Bus - Er wei ter ung en/ Et herNet /I P/SK CU 4-EIP / 275271019 / Basisi nf ormati onen [ SK CU4- EI P] @ 4\ mod_1384951329490_388. doc x @ 105631 @ 555 @ 1
SK CU4-EIP Part number: 275 271 019
EtherNet/IP® - Internal bus – interface
NOTICE Validity of the documents
This document is only valid in combination with the operating instructions for the relevant frequency inverter. All
of the information that is relevant for a safe start-up of this module and the frequency inverter is only available
under these conditions.
Scope of supply
1 x Module SK CU4-EIP
1 x System bus cable set grey / black
1 x 24 VDC cable set brown / blue
2 x Connecting screws M4 x 20, cross-head
Field of use
Internal interface for connecting decentralised frequency inverter (SK 180E … SK 2xxE) to a
EtherNet/IP field bus. It is connected to the inverter via the system bus and can respond directly with
up to 4 frequency inverter. 2 digital inputs are available.
Technical data
Module
Temperature range -25°C … xx °C * Vibration resistance 3M7
Temperature class Class 3k3 Firmware version V1.2 R0
Protection class IP20 Hardware version AA
Supply voltage 24 V ± 20
%, ≈ 100 mA
Reverse polarity
protected
* The upper temperature limit depends on the frequency inverter and the operating mode à see "Derating"
Digital input - working range Low: 0 V … 5 V, High: 15 V … 30 V
Digital input - specific data R
i
= 10 kΩ, input capacity: 10nF, reaction time 1 ms, inputs
according to EN 61131-2 type 1