NORSTAT Safety Light Curtains,Safety Controllers - Manual (Page 14)

12
Type 2 safety light curtains offering the following main features:
▪Easy connection and installation thanks to the M12 connectors and the use of
unshielded cables up to 100 m.
▪Built-in main safety functions.
▪2 safety PNP static outputs.
▪Built-in auto-test function, every 0.5 sec.
▪Models Master/Slave for cascade connection of two light curtains.
▪Models with 2, 3 and 4 beams Long Range, max 60 m.
▪Built-in Muting function for models MXL.
▪Built-in Muting sensors for models MXL L and MXL T.
▪IP 65 protection rate.
▪Operating temperature range: 0 to 55 °C.
▪Cross section 35 x 45 mm.
Vision light curtains may be connected to the dedicated safety interfaces series AD SR,
or directly to contactors actuated and controlled by the light curtain, or to MOSAIC, or
to suitable commercial safety modules or safety PLCs.
Special models complying with “Directive ATEX” 94/9/EC - Dust Zone 22 - Gas Zone 2
available on request.
THE VISION RANGE
VISION V
▪Protected height range 160 to 1810 mm
▪6 types of detection:
- Resolution 20 - 30 - 40 mm for hand detection.
- Resolution 50 - 90 mm for detection of the body in a dangerous area
- 2 - 3 - 4 beams for detection of the body in access monitoring
▪Max range 16 m for models VH and 6 m for models VL
▪M12, 5-pole connectors
▪Automatic Start/Restart.
The ideal light curtain for straightforward interfacing with safety modules or safety PLCs.
Safety level:
TYPE 2
SIL 2 – SILCL 2
PL d – Cat. 2
E S P E
VISION
NORSTAT INC. 300 Roundhill Dr. Rockaway, NJ 07866 Tel: 973-586-2500 Fax: 973-586-1590 www.norstat.com