NORSTAT Safety Light Curtains,Safety Controllers - Manual (Page 20)

18
SAFETY INTERFACES AND RELAYS
AD SR1
Interface module between the safety light curtains EOS4 A, EOS2 A, Admiral AD, Admiral
AX BK, Vision V and the machine control circuits.
With guided-contact safety relays, 2 NO contacts and PNP output for relay status signaling.
▪Start/Restart interlock
▪EDM Feedback input for extra external contactors monitoring.
AD SRM
Interface module between the safety light curtains EOS4, EOS2, Admiral, Vision, the safety
laser PHARO and the machine control circuits, with 2-sensor logic integrated Muting.
With guided contact safety relays, 2 NO contacts and PNP output for relay status signaling.
▪Start/Restart interlock
▪EDM Feedback input for extra external contactors monitoring
▪Muting Timeout selectable, 30 sec, 90 min or infinite
▪Integrated Override with selectable 2-mode operation
▪Muting Enable input.
AD SR0, AD SR0A
Interface relay modules for safety light curtains with feedback input for EDM, such as
EOS4 X, Admiral AX, EOS2 X, Vision VX/VXL/MXL and Janus.
With guided-contact safety relays, 2 NO + 1 NC (AD SR0) or 2 NO contacts (AD SR0A).
Additional NC contact line for the monitoring by light curtain (EDM).
SAFETY BUS INTERFACE
E S P E
E S P E
E S P E
Safety level:
TYPE 4
SIL 3 – SILCL 3 – PL e – Cat.4
Safety level:
TYPE 4
SIL 3 – SILCL 3 – PL e – Cat.4
Safety level:
TYPE 4
SIL 3 – SILCL 3 – PL e – Cat.4
Please contact Reer for technical support about
the connection of EOS4 A, Admiral AD, EOS2 A and Vision V
safety light curtains to the most common safety buses.
NORSTAT INC. 300 Roundhill Dr. Rockaway, NJ 07866 Tel: 973-586-2500 Fax: 973-586-1590 www.norstat.com