PNI TCM - Manual (Page 36)

PNI Sensor Corporation DOC#1014688 r06
TCM User Manual – July 2013 Page 31
6.5 Test Tab
6.5.1 Current Reading
Once the <Go> button is selected the module will begin outputting heading, pitch and roll
information. Selecting the <Stop> button or changing tabs will halt the output of the
module.
Contrast
Selecting this box sets the “Current Readings” window to have yellow lettering on a
black background, rather than black lettering on a white background.
6.5.2 3D Model
The helicopter will follow the movement of the TCM and give a visual representation of
the module’s orientation, assuming the “Enable 3D Model Display” box is selected on the
Configuration tab.
6.5.3 Acquisition Settings
These indicators mimic the pertinent selections made on the Configuration tab.