Raytec Milestone Plug-in - Manual (Page 11)

10
Raytec Global (excluding Americas) - Tel: +44 (0) 1670520055 [email protected]
Raytec Americas - Tel: +1 613 270 9990 Toll Free: +1 888 505 8335 [email protected]
www.rayteccctv.com
Click the discover button and the changes to the illuminator name should appear.
Note that any illuminators you wish to control through your VMS system should be
configured for VMS control. This can be done through the VARIO IP web interface in the
settings/groups page by deselect
ing the “Local (No VMS server)” option. Double click on
the individual illuminators within the discovery application to access the VARIO IP web
interface.
Once you have configured your illuminators you are ready to add them to the Milestone
system and configure them.
Note: You cannot run both the discovery tool and the
milestone integration at the same time as the
communications will conflict with each other.