Raytec Milestone Plug-in - Manual (Page 5)

4
Raytec Global (excluding Americas) - Tel: +44 (0) 1670520055 [email protected]
Raytec Americas - Tel: +1 613 270 9990 Toll Free: +1 888 505 8335 [email protected]
www.rayteccctv.com
3 System Requirements
3.1 Pre- Requisites
Milestone XProtect Client or Server installed
.net framework 4 and 4.5
Version 1.1.0 Vario IP firmware or above
The Raytec Milestone plug-in has been tested with and is compatible with the latest
supported versions of the Milestone XProtect VMS product range which support the
Milestone Integration Platform (MIP) architecture. At the time of testing this was:
XProtect Corporate 5.0
XProtect Enterprise 8.1
XProtect Professional 8.1
XProtect Express 1.1
Raytec can test our Raytec Milestone Plug-in against prior versions of products in the
XProtect range on request, providing that they are in the Milestone general availability
phase and that the particular product/version supports the MIP architecture. If it is in the
Milestone limited availability phase, Raytec may still be able to test against this version,
providing it supports the MIP architecture. After discontinuation you may need to upgrade to
the latest version supported by Milestone to be able to use the Raytec Milestone Plug-in.
3.2 Hardware Requirements
Windows 7 or Windows Server 2008/R2
10 Mb free HDD space
512Mb RAM
Note: The requirements for the Milestone XProtect software should have also been met
before this installation is performed.