Raytec Milestone Plug-in - Manual (Page 13)

12
Raytec Global (excluding Americas) - Tel: +44 (0) 1670520055 [email protected]
Raytec Americas - Tel: +1 613 270 9990 Toll Free: +1 888 505 8335 [email protected]
www.rayteccctv.com
Expand Advanced Configuration->MIP Plug-ins->Raytec Vario IP->Groups and right click
on the Group
s node and select “Create New”, the following screen will be displayed.
This is the new group configuration screen. It will allow you to create a group and configure
how it responds to events from the XProtect system.
Group Name - Required
The name of the group, which will be seen in the management application and in the smart
client. It should be named in a way that will allow the user to identify quickly the location
and/or function of the group.
Group Description
– Optional
Provides a description of this group. This is not shown anywhere else in the application and
serves only for notes and information about this group.
Lamp Control Option
– Covered in section 6.4
This section allows you to configure the actions for the illuminators. Detailed instructions
are covered in section 6.4
Once you have set-up your groups you are ready to start adding your VARIO IP illuminators
to them.