Sterlco SPV Remote Proportioning Devices User Manual
Page 11
Advertising
![background image](/manuals/373391/11/background.png)
Remote Proportioning Valve
Chapter 3: Installation
11 of 28
Floor-Mount Installation
Use the following procedure to install the SPV using the floor stand: (See Figure 2 for more
information.)
1. Assemble the stand by inserting the standard into the floor plate and tightening the
set screw.
2. Complete the assembly by following steps 3 through 6 on page 9.
3. Position the floor stand so the clean-out and inspection hatches are accessible and the
material hoses do not interfere with workspace or create a tripping hazard.
Figure 2: Floor-Mount Configuration
Advertising