Sterlco SPV Remote Proportioning Devices - Manual (Page 6)

Remote Proportioning Valve Chapter 1: Safety 6 of 28
1-3 Warnings and Precautions
STERLING water management systems products are designed to provide safe and reliable
operation when installed and operated within design specifications, following national and
local safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Disconnect and/or lock out power before servicing or maintaining the system.
; Use care when LOADING, UNLOADING, RIGGING, or MOVING this
equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before working on equipment.
You should remove the fuses and carry them with you.
; Make sure that system equipment and components are properly GROUNDED before
you switch on power.
; Do not jump or bypass any electrical safety control.
; Do not restore power until you remove all tools, test equipment, etc., and the system
and related equipment are fully reassembled.
; Only PROPERLY TRAINED personnel familiar with the information in this
manual should work on this equipment.