Sterlco Upright High Temperature Heat Transfer - Manual (Page 39)

Upright Portable Hot Oil TCUs Chapter 7: Appendix 39
Chapter 7: Appendix
7-1 Optional Components
The following is a list of options which your portable hot oil tcu may have been equipped
with:
• Drain valve
• Hour meter; measures total pump run time hours
• General fault visual alarm
• Autovent sequence; deducts available
• Low level alarm; deducts available
• High level indicator light
• Manual bypass; deducts available
• M2B+ microprocessor controller options include:
• 4-20 mA remote set point and retransmission
• SPI protocol, RS-485
• General protocols, types RS-232, -485
• Remote sensor; 10 Ft. (3m)
• Heat exchanger options of 3.9 sq. ft. (0.3627 sq. m) and 6.7 sq. ft. (0.6231 sq. m)
• Remote controller
• Lexan cover
• Optional operating voltages of 208/3/60, 230/3/60, 575/3/60, 380/3/50, and 415/3/50