AT&T 360 - Manual (Page 13)

11
Programming Area Codes
In addition to programming your home area code (see Step 9 in
INSTALLATION), you can program up to four other local area codes.
These are area codes that do not require dialing a “1” before them.
After programming, if you receive a call from one of these area codes,
the screen displays the ten digits (three digits of area code plus seven
digits of phone number). When you use the Display Dial feature, the
unit dials ten digits, without inserting a “1” before the area code.
1 Press and release N until the screen displays LOCAL AREA CODE?.
2 Press + or - until the screen displays the first digit of the area code,
then press
D
.
3 Press + or - until the screen displays the second digit of the area
code, then press
D
.
4 Press + or - until the screen displays the third digit of the area code,
then press N.
Setting Display Options
You can customize how the Caller ID features of this telephone work.
Press and release N until the option you want to change appears,
then use + or - to scroll through display choices. Press N to save
your setting.
See the following page for Display Options.
CALLER ID OPERATION