AT&T 360 - Manual (Page 18)

16
RADIO/ALARM OPERATION
Setting Alarm Time
You can set the alarm ( ALARM A) or (ALARM B) to wake you with the
radio or the buzzer.
NOTE: To set the clock, see the INSTALLATION section of this manual.
1 Press and hold d for about one second.
2 Press and release a A
— OR —
Press and release a B.
3 Press + or - until the screen displays the hour for the alarm.
4 Press d when the screen displays the correct alarm hour.
5 Press + or - until the screen displays the minute setting for the
alarm.
6 Press and release a A or a B to store the alarm setting. The
screen flashes the appropriate alarm and the time set. The alarm is
now set, and the screen displays the alarm you set.
Turning the Alarm On and Off
To turn the alarm on, press and release a A
— OR —
Press and release a B.
If the screen flashes the alarm selection briefly, then steadily displays the
icon for the selected alarm, the alarm is now set.
To turn the alarm off, press and release the alarm button again. The icon
for the selected alarm disappears.
Snooze Alarm
When the alarm sounds, you can silence it for about 10 minutes by
pressing z.