AT&T 360 - Manual (Page 6)

4
8 Select Display Language.
Press N. The screen displays
WHICH LANGUAGE?. Press +
until the screen displays your selected language. Press N for
1.5 seconds to save the selected display language.
NOTE: To change the display language at a later date, see “Setting
Display Options” in the CALLER ID OPERATION section of this manual.
9 Store Home Area Code(s).
•
Press N twice. The screen displays HOME AREA CODE?
• Press + or - until the screen displays the first digit of your
home area code. Press
D
.
• Press + or - until the screen displays the second digit of
your home area code. Press
D
.
• Press + or - until the screen displays the third digit of
your home area code.
• Press N to save setting.
NOTE: To store other local area codes, see “Display Dial” in the
CALLER ID OPERATION section of this manual.
10 Check for dial tone.
Lift the handset and check for a dial tone. If you do not hear a dial
tone, turn to IN CASE OF DIFFICULTY in this manual.
Display Dimmer Switch Brightness
Use the DIM switch on the back of the set to adjust the brightness of the
display screen. Set to OFF, LO or HI.
NOTE: You can conserve battery power in a power failure by setting
the switch to OFF.
INSTALLATION