Brother PT-9700PC - Manual (Page 29)

29
Vertical movement commands
LF Line feed
[ASCII] LF
[Decimal] 10
[Hexadecimal] 0A
[Parameters] None
[Description]
・ Performs the same line feed operation as CR.
・ A carriage return command immediately after a line feed is ignored.
FF Page feed
[ASCII] FF
[Decimal] 12
[Hexadecimal] 0C
[Parameters] None
[Description]
・ Starts printing.
・ Clears the text, image data and bar codes after printing.
・ If the data does not fit within the printable height of the tape, the data is divided and
printed onto multiple pages.
・ If the length of the print data exceeds 1 meter, the LED lights up to indicate that an error
has occurred.
ESC J Forward paper feed
[ASCII] ESC J n
[Decimal] 27 74 n
[Hexadecimal] 1B 4A n
[Parameters] 0≤n≤255
[Description]
・ Finishes input of the current line, then moves the vertical print position forward by n/180
inch.
・ If n is less than 24, the feed amount is 24/180 inch (approximately 0.34 cm).