Brother PT-9700PC - Manual (Page 40)

40
Kanji commands
FS Y Specify kanji size
[ASCII] FS Y n
[Decimal] 28 89 n
[Hexadecimal] 1C 59 n
[Parameters] 0≤n≤6 or 30h≤n≤36h
[Description]
・ Specifies the character size.
・ The character size can be set to AUTO or a fixed size (six sizes).
If n=0 (or 30h), the AUTO size is applied.
If n=1 (or 31h), the 4-point size is applied. (21 dots)
If n=2 (or 32h), the 6-point size is applied. (28 dots)
If n=3 (or 33h), the 9-point size is applied. (44 dots)
If n=4 (or 34h), the 12-point size is applied. (56 dots)
If n=5 (or 35h), the 18-point size is applied. (88 dots)
If n=6 (or 36h), the 24-point size is applied. (120 dots)
FS - Apply kanji underlining
[ASCII] FS - n
[Decimal] 28 45 n
[Hexadecimal] 1C 2D n
[Parameters] n=0 and 1 or 48 and 49
[Description]
・ Applies or cancels underlining.
・ If n=1, underlining is applied.
・ If n=0, underlining is cancelled.
・ The underlining specified by this code is a continuous line.
・ Spaces between characters and words are also underlined.