Brother PE-DESIGN PLUS - Manual (Page 46)

44
Arranging Embroidery Designs
■
Editing the sewing order
The sewing order can be changed by selecting the
frame containing the pattern, then dragging the
frame to the new location. A red line appears,
indicating the position where the frame is being
moved.
■
Changing colors
1.
Select one or more frames in the Sewing
Order pane, and then click at the top of the
Sewing Order pane.
 The Color pane appears in front of the
other panes.
2.
Click the desired color in the Color pane.
c
“Color” on page 47.
■
Changing sewing attributes
1. Select one or more frames in the Sewing
Order pane, and then click the Sewing
Attributes tab. If the Sewing Attributes tab is
not displayed, click View tab in the Ribbon,
then Sewing Attributes.
2.
Change the sewing attributes and sew type.
c
“Sew type” on page 45 and “Specifying
sewing attributes” on page 46
An alternative method for moving
the frames is by clicking the
buttons at the top of the Sewing
Order pane.
:Click to move the selected
pattern to the beginning of
the sewing order.
:Click to move the selected
pattern ahead one position
in the sewing order.
:Click to move the selected
pattern back one position in
the sewing order.
:Click to move the selected
pattern to the end of the
sewing order.
a
Note:
Check the stitching after changing the
sewing order to be sure that overlapping
patterns will not be sewn in the wrong order.
XE8656-001.book Page 44 Thursday, June 30, 2011 2:56 PM