Brother PE-DESIGN PLUS - Manual (Page 9)

7
Before Use
Before Use
2.
Click Run setup.exe.
 The User Account Control dialog box
appears.
3.
Click Yes.
 After a short while, the following dialog
box automatically appears.
4. Select the desired language, and then click
OK.
 The InstallShield Wizard starts up, and
the first dialog box appears.
5. Click Next to continue with the installation.
 A dialog box appears, allowing you to
select the folder where the software will
be installed.
6.
Check the installation location, and then click
Next.
 A dialog box appears, indicating that
preparations for installation are finished.
7.
Click Install to install the application.
 When the installation is completed, the
following dialog box appears.
b
Memo:
To install the application into a different
folder:
1) Click Change.
2) In the Change Current Destination
Folder dialog box that appeared, select
the drive and folder. (If necessary, type
in the name of a new folder.)
3) Click OK.
 The Destination Folder dialog box of
the InstallShield Wizard shows the
selected folder.
4) Click Next to install the application into
the selected folder.
XE8656-001.book Page 7 Thursday, June 30, 2011 2:56 PM