Changing application settings, Changing the grid settings, System unit – Brother PE-DESIGN PLUS User Manual
Page 59: Arranging embroidery designs
57
Arranging Embroidery Designs
Arra
nging Embro
ide
ry Des
ign
s
Changing Application Settings
Changing the grid settings
A grid of dotted lines or solid lines can be displayed
or hidden, and the spacing for the grid can be
adjusted.
1.
Click .
2.
Specify the grid settings.
Show Grid:
Select this check box to display the grid.
Snap to Grid:
Select this check box to align patterns
with the grid.
Interval:
Specify the grid spacing.
System unit
Click
/
to switch the measurement units
between millimeters and inches.
b
Memo:
The snap feature works whether or not the
grid is displayed.
b
Memo:
The system units can also be changed with
the following operation.
Click 1, then 2.
Click System Unit, and then select the
desired measurement units (mm or inch).
1
2
XE8656-001.book Page 57 Thursday, June 30, 2011 2:56 PM