Brother PE-DESIGN PLUS - Manual (Page 6)

4
Before Use
Before Use
Introduction
Package Contents
Check that the following items are included. If anything is missing or damaged, contact your authorized dealer
or Brother Customer Service.
a LED indicator
This indicator lights up when the unit is turned on, and flashes when the USB Card Writer Module is
communicating with the computer.
b Card slot
Insert an original card/embroidery card here.
c USB connector
Connect to the computer.
USB Card Writer Module CD-ROM Original card Operation Manual
Contains the software
and Operation Manual
(PDF format).
a
Note:
• The only original cards that can be used with this USB Card Writer Module are those like the one
enclosed or optional original cards of the same type.
• Never remove an original card or unplug the USB cable while this indicator is flashing.
b
Memo:
• Since power is supplied to the USB Card Writer Module through the USB connection to the
computer, there is no power supply cable or power switch.
• Be sure to keep original cards away from high humidity, direct sunlight, static electricity and strong
shocks. Furthermore, do not bend the cards.
Optional Supply
Additional blank original cards can be purchased through an authorized dealer.
Original card
a
c
b
XE8656-001.book Page 4 Thursday, June 30, 2011 2:56 PM