Brother CM100DM User Manual

Page 15

Advertising
background image

13

1

Note

Place the material within the attaching area
(grid area) on the adhesive side. If the material
extends from the attaching area, it may be
damaged by the feed rollers when the mat is
fed.

Memo

The mat does not have a top and bottom. It can
be inserted into the feed slot from either end.

d

Firmly attach all of the material to the mat so
that there are no wrinkles and no part can curl
off.

• Otherwise, curls in the material may become

caught when the mat is inserted.

Note

If the mat is dirty, clean it. For details, see
“Cleaning the Mat” on page 58.

Peeling Off the Material (Lightweight Paper)

Follow the steps in adjusting the blade extension
(page 18), installing the blade holder (page 19)
and trial cutting (page 19) to set up your machine.
After cutting the material, use a spatula to slowly
peel off the paper.

■ 2 Medium Weight Paper

a Standard cut blade
b Standard cut blade holder (turquoise)
c Standard mat (turquoise and purple)
d Low tack adhesive mat (turquoise) (When

cutting slick paper)

Attaching the Material (Medium Weight Paper)

Follow the steps in “Attaching the Material
(Lightweight Paper)” on page 12.

Peeling Off the Material (Medium Weight Paper)

Follow the instructions in “Peeling Off the
Material (Lightweight Paper)” on page 13.

■ 3 Lightweight Fabric for Quilt Piecing

a Standard cut blade
b Standard cut blade holder (turquoise)
c Standard mat (turquoise and purple)
d High tack adhesive fabric support sheet (light

blue backing)

Attaching the Material (Lightweight Fabric for
Quilt Piecing)

Use the specially designed adhesive sheet to
attach lightweight fabrics for quilt piecing to the
standard mat. The high-tack adhesive fabric
support sheet is perfect for quilt piecing since it
will not leave adhesive on the surface of fabric.
Support sheets can be repeatedly used unless they
are peeled off the mat. They should only be used
with patterns that have a seam allowance. When
cutting patterns without a seam allowance, use
the iron-on fabric appliqué contact sheet.

a

c

b

d

a

d

c

b

Advertising
This manual is related to the following products: