Auto shutdown – Brother CM100DM User Manual
Page 26
24
Seam Allowance
Specify the seam allowance. This is applied when
drawing on fabric, then cutting it, for example, when
making quilt pieces. For details, see “Cutting Around
Drawings” on page 44.
Memo
•
When multiple patterns are cut at the same
time, the setting specified in this screen is
applied to all patterns.
•
If cutting line data saved with a different seam
allowance is imported and used, the setting
specified in this screen will have priority over
the saved setting.
Pattern Interval
Specify the spacing between patterns as well as white
space around the edges of cutting area when patterns
in the pattern layout screen are automatically
arranged. The larger the number setting, the further
spacing between patterns. For details on the auto
layout function, see “Auto Layout Functions” on
page 38.
Note
•
Set the number to “3” or higher when
lightweight fabric is attached to the mat with a
high tack adhesive fabric support sheet.
■ Page 4
Opening Screen
Select whether the opening slide show is displayed
after the machine is turned on. If the slide show is
displayed, touch the screen to display the home
screen.
■ Page 5
No.
Displays the serial number specific for this machine.
Ver.
Displays the version information for this software.
Auto Shutdown
If the machine is not used for a specified length of
time, it will automatically turn off. The length of time
until the machine turns off can be specified in the
settings screen.
If the machine is automatically turned off after you
reach the pattern layout screen, the stored
information can be recalled when the machine is
turned on again. Following the instructions in the
message screen that appear when the machine is
turned on again, touch the “OK” key to display the
pattern layout screen or touch the “Cancel” key to
return to the home screen.
a Message screen
b Pattern layout screen
c Home screen
If the machine is automatically turned off before you
reach the pattern layout screen, the home screen will
be displayed when the machine is turned on again.
a
b
c