Brother MFC-J4710DW - Manual (Page 20)

17
4
4
Wi-Fi Direct network terms
4
Group Owner (G/O)
4
If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi
Direct network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct network. The
default setting is Off.
Device Information
4
Device Name
4
You can check the device name of the Brother machine in the Wi-Fi Direct network environment. The device
name will be shown as MFC-xxxx or DCP-xxxx (where xxxx is your model name.).
SSID
4
This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the
SSID name.
IP Address
4
This field displays the current IP address of the machine, as assigned by the G/O.
Status Information
4
Status
4
This field displays the current Wi-Fi Direct network status. When your machine is a G/O, it displays the
message G/O Active(**) (where ** is the number of devices). When your machine is a client, the machine
displays the message Client Active. If you see Off, your machine’s Wi-Fi Direct interface is disabled.
Signal
4
This field displays the current Wi-Fi Direct network signal strength.
Channel
4
This field displays the current Wi-Fi Direct network channel.
Speed
4
This field displays the current Wi-Fi Direct network speed.
I/F Enable
4
If you want to use the Wi-Fi Direct network connection, set I/F Enable to On.
Glossary
4