Manual configuration for a wi-fi direct network – Brother MFC-J4710DW User Manual

Page 11

Advertising
background image

Configuration methods

8

2

c

Press Network.

d

Press Wi-Fi Direct.

e

Press Group Owner and then press On.

f

Press PIN Code.

g

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

h

When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate

your mobile device’s WPS PIN configuration method (see your mobile device’s user’s guide for
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press

.

i

The machine will wait for a connection request from your mobile device. When PIN Code appears, type

the PIN displayed on your mobile device in to the machine.
Press OK.

j

If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 14.

Manual configuration for a Wi-Fi Direct network

2

If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect.

a

Press .

b

Press All Settings.

c

Press Network.

d

Press Wi-Fi Direct.

e

Press Manual.

f

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

g

The machine will show the SSID name and Password for two minutes. Go to the wireless network
settings page of your mobile device and type the SSID name and password.

Advertising
This manual is related to the following products: