One-push configuration using wi-fi direct – Brother MFC-J4710DW User Manual

Page 8

Advertising
background image

Configuration methods

5

2

Configuring your network using Wi-Fi Direct
(For MFC-J2510/J4510DW/J4710DW)

2

The Wi-Fi Direct network settings are configured from the control panel of your Brother machine.

One-push configuration using Wi-Fi Direct

2

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect.

a

Press .

b

Press All Settings.

c

Press Network.

d

Press Wi-Fi Direct.

e

Press Push Button.

f

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

g

Activate Wi-Fi Direct on your mobile device (see your mobile device’s user’s guide for instructions) when
Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed.

Press OK on your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press

.

h

Do one of the following:

When your Brother machine is the G/O, connect your mobile device to the machine directly.

When your Brother machine is not the G/O, it will display available device names with which to
configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press
OK. Search for available devices again by pressing Rescan.

i

If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 14.

Advertising
This manual is related to the following products: