Brother MFC 7840W - Manual (Page 159)

Menu and features
145
C
Main
Menu Submenu Menu Selections Options Descriptions Page
5.LAN
(MFC-7840W
only) 1.Wired 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs. See
Network
User’s
Guide
on the
CD-ROM.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255] Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255] Enter the Gateway
address.
5.Node Name BRN
XXXXXXXXXXXX Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP address
of the primary or
secondary WINS server.
8.DNS Server (Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP address
of the primary or
secondary DNS server.
9.APIPA On*
Off
Automatically allocates
the IP address from the
link-local address range.
0.IPv6 On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.brother.com/
for more information.
The factory settings are shown in Bold with an asterisk.