Brother HL-3140CW - Manual (Page 10)

10
Macintosh
USB
For Macintosh USB Interface Cable Users
9
Before you install
a
Make sure your machine is connected to an AC
power source and your Macintosh is ON. You
must be logged on with Administrator rights.
b
Connect the USB cable to the USB port
marked with the symbol on your machine,
and then connect the cable to your Macintosh.
c
Make sure your machine is turned on.
10
Install the printer driver
a
Put the CD-ROM into your CD-ROM drive, and
then double-click the BROTHER icon on your
desktop.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
(HL-3140CW / HL-3150CDW / HL-3170CDW)
Choose Local Connection (USB), and then
click Next.
d
The installation screens appear one after
another. If prompted, follow any on-screen
instructions.
e
Choose your machine from the list, and then
click Next.
f
When the Add Printer screen appears, click
Add Printer.
g
Choose your machine from the list, click Add,
and then click Next.
IMPORTANT
For users of Mac OS X v10.6.7 or lower: upgrade
to Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the
latest drivers and information for the Mac OS X
you are using, visit http://solutions.brother.com/.)
NOTE
It may take a few minutes for the installation to
complete.
NOTE
• For HL-3170CDW: to add the PS driver
(BR-Script3 printer driver), select it from the
Print Using (Use) pop-up menu.
• When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
Finish
The installation is now
complete.