Brother HL-3140CW - Manual (Page 31)

31
For Network Users
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings using HTTP (Hypertext
Transfer Protocol).
a
Open your browser.
b
Type “http://machine’s IP address/” into your
browser’s address bar (where “machine’s IP
address” is the IP address of the Brother
machine or the print server name).
 For example: http://192.168.1.2/
Reset the print server network
settings
a
Press a or b to choose Network.
Press OK.
b
Press a or b to choose Network Reset.
Press OK.
c
When Reboot OK? appears, press a to
choose Yes.
The machine will restart.
Print the Printer Settings Page
The Printer Settings Page lists all of the current printer
settings, including network settings.
a
Press a or b to choose Machine Info..
Press OK.
b
Press OK to choose Print Settings.
The machine will print the current printer
settings.
NOTE
We recommend Windows ® Internet
Explorer ® 8.0/9.0 for Windows ® and Safari 5.0 for
Macintosh. Please also make sure JavaScript
and Cookies are always enabled in whichever
browser you use. To use a web browser, you will
need to know the IP Address of the print server,
which is listed on the Printer Settings Page.
NOTE
If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
For more information, see Network User's
Guide: Web Based Management.
NOTE
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try printing
the page again.