Brother HL-3140CW - Manual (Page 5)

5
d
Load paper in the tray and make sure:
 The paper is below the maximum paper
mark (bbb) a. Overfilling the paper tray will
cause paper jams.
 The side to be printed on is face down.
 The paper guides touch the sides of the
paper so it will feed properly.
e
Put the paper tray firmly back in the machine.
Make sure it is completely inserted into the
machine.
f
Lift the support flap a to prevent paper from
sliding off the face-down output tray.
4
Turn on the machine
a
Connect the AC power cord to the machine and
then connect it to an AC power outlet.
b
Press and hold down on the control panel.
c
Do one of the following:
 For HL-3140CW / HL-3150CDW /
HL-3170CDW: Go to step
5.
 For HL-3150CDN: Go to step 6.
For information about recommended paper:
see User's Guide: Recommended paper and
print media.
IMPORTANT
DO NOT connect the interface cable
yet.