Brother HL-3140CW - Manual (Page 27)

27
For Wireless Network Users
Wireless Ne
twork
Windows
®
Ma
cintosh
Entering Text for Wireless Settings
Hold down or repeatedly press the a or b key to select from the following characters:
(space) !"#$%&'() +,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
Press OK to confirm the current character, and then enter the next character.
Press the Back key to delete the characters you have entered.
TS-07
The machine cannot detect a wireless access point/router that has WPS or AOSS™
enabled.
To configure your wireless settings using WPS or AOSS™, you must operate both your
machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
If you do not know how to operate your wireless access point/router using WPS or AOSS™,
see the documentation provided with your wireless access point/router, ask the manufacturer
of your wireless access point/router, or ask your network administrator.
TS-08
Two or more wireless access points/routers that have WPS or AOSS™ enabled are
detected.
- Confirm that only one wireless access point/router within range has WPS or AOSS™
active and try again.
- Try starting again after a few minutes in order to avoid interference from other wireless
access points/routers.
Error Code Recommended Solutions