Brother HL-2070N - Manual (Page 14)

Configuring your network printer
2 - 4
2
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address (Node Address above) by printing out the Printer
Settings Page. See Printing the Printer Settings Page on page 7-2 for information on how to print the
Printer Settings Page on your print server.
4
Double-click the unconfigured device you want to configure.
5
Enter the IP address, Subnet Mask and Gateway (if needed) of your print server.
6
Click OK.
7
With the correctly programmed IP address, you will see the Brother print server in the device list.
Using other methods to configure your network printer
You can configure your network printer using other methods. See Other ways to set the IP address (for
advanced users and administrators) on page A-1.
Changing the print server settings
Using the BRAdmin Professional utility and the TCP/IP protocol to change the
print server settings (for Windows
® only)
1
Start the BRAdmin Professional utility (from Windows ® 95/98/Me, Windows NT ® 4.0 and Windows ®
2000/XP), by clicking Start / Programs / Brother Administrator Utilities / Brother BRAdmin
Professional Utilities / BRAdmin Professional.
2
Select TCP/IP in the left frame of the main BRAdmin window.
3
Select the print server which you want to configure, in the right frame of the main BRAdmin window.
4
Select Configure Print Server from the Control menu.
5
Enter a password. The default Password is access.
6
You can now change the print server settings.