Brother HL-2070N - Manual (Page 26)

Network printing from Windows ® : NetBIOS Peer-to-Peer printing
4 - 4
4
Installing the Brother NetBIOS Port Monitor
The Brother NetBIOS Port Monitor requires the TCP/IP transport protocols to be installed on your Windows ®
95/98/Me/2000/XP and Windows NT ® 4.0 computer. To install those protocols, see your Windows ®
documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the
Brother print server and your client PC.
Note
If you already installed the driver from the printers CD-ROM Installer and you selected “Brother Peer-to-Peer
Network Printer” during the installation then you do not need to install the Brother Network Print Software
again.
1
Start the CD-ROM installation menu program according to the printer Quick Setup Guide.
2
Select the HL-2070N and the desired language. Then click Install Other Drivers or Utilities.
3
Select the Network Print Software installation program.
4
Click Next in response to the Welcome message.
5
Read the license agreement carefully. Then follow the on-screen instructions.
6
Select Brother Peer-to-Peer Print (NetBIOS) installation.
7
Select the desired directory to install the Brother Network Direct Print files and click Next.
8
Enter the port name that you wish to use. The port name must start with "BNT". For example BNT1.
Whichever name you choose, it must be unique. Then click OK. The name must be unique on your PC,
however other computers can use the same port name as the name you specify on your PC.
9
You must now enter the server name and port name for the actual print server. You can use the Browse
button to search for the print server, select the domain/workgroup name, and then the server is listed. If
the print server does not automatically appear in your browse list, then you must ensure that the domain
name is configured correctly. Otherwise you must enter the name manually. The name should be
compliant with UNC (Universal Name Convention). For example: \\NodeName\ServiceName.
Where NodeName is the NetBIOS name of the Brother print server (the default name is usually
BRN_xxxxxx
, where xxxxxx is the last six digits of the Ethernet address), and ServiceName is the
service name for NetBIOS of the print server. By default it is BINARY_P1. For example:
\\BRN_310107\BINARY_P1
Note
You can find the NetBIOS name and node name by printing out the Printer Settings Page. See Printing the
Printer Settings Page on page 7-2.