Brother HL-2070N - Manual (Page 17)

Network printing from Windows ® : basic TCP/IP Peer-to-Peer printing
3 - 2
3
4
Select Local printer and deselect the Automatically detect and install my Plug and Play printer
option.
5
Click Next.
6
You must now select the correct Network printing port. Select Create a new port and select Standard
TCP/IP Port port from the pull-down window.
7
Click Next.
8
The Add Standard TCP/IP Printer Port Wizard will now appear. Click Next.
9
Enter the IP address, or the print server name you wish to configure. The Wizard will automatically enter
the Port name information for you.
10
Click Next.
11
Windows ® 2000/XP will now contact the printer that you specified. If you did not specify the correct IP
address or name then you will receive an error message.
12
Click the Finish button to complete the Wizard.
13
Now that you have configured the port, you must specify which printer driver you wish to use. Select the
appropriate driver from the list of supported printers. If you are using a driver supplied with the printer on
CD-ROM then select the Have Disk option to browse to the CD-ROM.
14
For example, select the “X:\Driver\PCL\WIN2K_XP\your language” folder (where X is your drive letter).
Click Open, and then OK. Select your printer model, then click Next.
15
Specify a name and click the Next button.
16
Now specify if you wish to share the printer, enter the share name and click Next.
17
Continue through the Wizard clicking the Finish button when complete.
Printer driver already installed
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
1
Select the printer driver you wish to configure.
2
Select File and then Properties.
3
Click the Ports tab of the driver and click Add Port.