Brother HL-2070N - Manual (Page 19)

Network printing from Windows ® : basic TCP/IP Peer-to-Peer printing
3 - 4
3
6
Select the Brother Peer-to-Peer Print (LPR) button.
7
Select the desired directory to install the Brother Peer-to-Peer Print (LPR) files and click Next. The
installation program will create the directory for you if it does not already exist on your disk.
8
Enter the Port name that you wish to use and click OK. The default port name is BLP1. Whichever name
you choose, it must be unique and it MUST begin with BLP.
9
You must now enter the actual IP address of the print server and the print server name. If you have edited
the hosts file on your computer or are using Domain Name System, you can also enter the DNS name
of the print server. As the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen in the printer settings page. The
NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
BRN_xxxxxx
where xxxxxx is the last six digits of the Ethernet address.
Note
• The node name and the NetBIOS name is printed on the Printer Settings Page. To learn how to print
the Printer Settings Page, see Printing the Printer Settings Page on page 7-2.
• If you search the device using the search function in Step 8 above, disable the Personal Firewall
software if you are using it. Once you are sure that you can print, re-start your Personal Firewall
software.
10
Click the OK button. When prompted you must re-boot your computer.
Associating to the printer
You must now create a printer on your Windows ® system using the standard Windows ® printer setup
procedure.
1
To do this, go to the Start button, select Settings and then Printers.
2
Double click the Add Printer icon to get the Add Printer Wizard.
3
Select My Computer (not Network Printer) and click Next.
4
Select the Brother LPR Port (the port name you assigned in step 7 of the “Installing Brother Peer-to-Peer
Software” section in this chapter) and click Next.
5
Select the desired printer model. If the correct model is not displayed, click the Have Disk option and
insert the CD-ROM supplied with your printer.
6
If the driver already exists, select Keep Existing Driver (if it does not exist, this step will be skipped),
and then click Next.
7
If desired, change the name of the printer then click Next.