Brother PocketJet PJ-673 w WLAN - Manual (Page 35)

Using the Printer
31
2
Connecting the iOS
Device to a Separate
Wireless Network Than
the One Connected to
the Printer
2
NOTE
• While connected to this printer in ad-hoc
mode, the device cannot connect to the
Internet.
• When an iOS device in ad-hoc mode
enters sleep mode, the connection
between the printer and iOS device will be
lost.
• Follow the procedure below to manually
return the ad-hoc wireless connection
setting to the infrastructure mode.
Changing the iOS Device’s
Settings
2
a
Start Settings on the iOS device.
b
Select .
c
A list of Wi-Fi networks (SSID) that can
be joined appears.
Select the SSID normally used for the
network connection (infrastructure
mode).
Connecting a
Windows
®
Computer
to a Separate Wireless
Network Than the One
Connected to the
Printer
2
(As examples, screens from Windows
®
7 are
used in the following procedures.)
a
Windows
®
8:
Click [Control Panel] in [Apps] screen -
[Network and Internet].
Click [Network and Sharing Center].
Click [Connect the Network].
Windows
® 7:
From the [Start] menu, click [Control
Panel]-[Network and Internet].
Click [Network and Sharing Center].
Click [Connect the Network].
Windows Vista
®
:
From the [Start] menu, click [Connect
to].
Windows
®
XP:
From the [Start] menu, click [Control
Panel]-[Network connection].
Right-click [Wireless Network
Connection], and then click [View
Available Wireless Networks].