Brother HE1 - Manual (Page 21)

Attaching the Embroidery Unit 19
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the Embroidery Unit
This section describes how to attach the embroidery unit.
Embroidery unit precautions
CAUTION
Note
z Do not touch the connector in the
embroidery unit connector slot. The
connector could be damaged, and it may
cause malfunctions.
z Do not lift up on the embroidery carriage,
and do not forcefully move it. It may cause
malfunctions.
a Carriage
Attaching the embroidery unit
Get the embroidery unit ready.
a
Make sure that the machine is turned off.
Memo
z Always turn off the machine before attaching
the embroidery unit. It may cause
malfunctions.
● Do not move the machine with the
embroidery unit in place. The embroidery
unit may be dropped and cause injury.
● Keep your hands and other objects away
from the embroidery carriage and frame.
Otherwise injury may result.
a
0711-0120-C-combo_E.book Page 19 Thursday, July 24, 2008 1:46 PM