Brother HE1 - Manual (Page 23)

Attaching the Embroidery Unit 21
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing the embroidery unit
Make sure that the machine is completely stopped
and follow the instructions below.
a
Remove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 48).
b
Press , and then press .
X The embroidery carriage moves into a
position where it can be saved.
c
Turn off the machine.
CAUTION
d
Hold the release button on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
a Release button
X The embroidery unit separates from the
machine.
CAUTION
● Always turn off the machine before
removing the embroidery unit. It may
cause malfunctions if removed when the
machine is turned on.
● Do not carry the embroidery unit by
holding the carriage. It may cause
malfunctions.
a
0711-0120-C-combo_E.book Page 21 Thursday, July 24, 2008 1:46 PM