Brother HE1 - Manual (Page 26)

24
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
a
Turn on the machine.
The highlighted display is the initial setting.
X The LCD comes on.
b
Press (Settings key) on the operation
panel.
X The setting screen appears.
c
Press the item to be set.
Switch the screen using (Previous page
key) and (Next page key).
• The following screens show their default
settings.
Example: Changing the measurement unit
d
When settings are complete, press
(Back key).
X The initial screen appears again.
Memo
z "NO." is the individual number for the
machine.
z "VERSION" is the program version which is
installed in the machine.
z Settings that are changed are saved even if
the power is turned off.
0711-0120-C-combo_E.book Page 24 Thursday, July 24, 2008 1:46 PM